high-temperature material
英 [haɪ ˈtemprətʃə(r) məˈtɪəriəl]
美 [haɪ ˈtemprətʃər məˈtɪriəl]
网络 高温材料
双语例句
- Gap: Consisted of high-temperature rating insulation material, it is intended to increase the reluctance to get the desired inductance.
气隙：由极高耐热性的绝缘材料构成，有意增大磁阻来得到合适的电感值。 - Silicon nitride ceram is widely used as a high-temperature structural material and is one of the most promising materials. Development of new structural materials used at high temperature is important and essential to take the first step in aerospace industry.
氮化硅陶瓷广泛用作高温结构材料，是很有前途的陶瓷材料之一。开发能耐更高温度、比强度更高的新型高温结构材料是保持航天航空优势的关键。 - The high-temperature transport, they should choose the material made of heat pumps, please contact me.
高温输送时，应选择耐高温的材料所制成的泵，请与我厂联系。 - Study and analysis is made of the effect of the high-temperature wear test parameters on high-temperature wear resistance of WC/ steel composites material under different heat-treatment condition.
研究了在不同热处理条件下，高温磨损试验参数对WC/钢复合材料（GJH&2合金）高温抗磨损性能的影响。 - Development of a High-Temperature Embeded Solid Lubrication Material and Investigation of its Friction-Wear Property
高温用镶嵌型固体润滑材料的研制及其摩擦磨损性能的考察 - Development of high-temperature high-powered PTC material
高温大功率PTC材料研制 - New generational high-temperature structure material ── intermetallic Compound Ni_3al
新一代高温结构材料&金属间化合物Ni3Al - Study on the tribological characteristics of High-temperature Self-lubricating nickel-base material
镍基高温自润滑材料的摩擦学特性研究 - The focus nowadays is that Intermetallic compounds comprising Al coatings are prepared by arc spraying on the surface of common material and high-temperature structural material.
在普通材料或者高温结构材料表面通过电弧喷涂的方法制备含铝金属间化合物涂层是目前研究的热点。 - The combined properties of high strength, high specific tenacity and good creep property at high-temperature make this alloy the important structural material for the aerospace industries.
该合金凭借其高强度、高的比强度和良好的高温蠕变性等优异的综合性能，成为航空航天工业中重要的结构材料。 - The detailed contents are as follows: ( 1) Rutile TiO_2 were prepared by "two-step method" including low-temperature hydrothermal process and high-temperature calcinations employing TiCl_4 as the source material.
以TICl4为原料，通过低温水热处理和高温煅烧两步法得到了金红石型TiO2纳米晶。 - 2, As the Cr_2O_3 content increases, the thermal shock resistance of the material will be increased, but the density and high-temperature strength of the material will be decreased;
增加Cr2O3含量，可提高镁铬材料的固一固直接结合率和抗热震性，但同时会降低材料的烧结性能和抗压强度； - The self-spread high-temperature synthesis ( SHS) technology, a new surface treatment process for materials developed in the late 1960s was described. The prospect of applying the self-spread high-temperature synthesis technology as a new material surface treatment process for petrochemical processing equipment was discussed.
介绍了60年代后期提出的一种材料合成新工艺&自蔓延高温合成（SHS）法，提出了SHS技术作为一种材料表面处理新工艺在石化设备上的应用前景。 - The room and high temperature hardness of Cr_7C_3/ Ni_3Al composite is much higher than that of stellite alloys. It is predicted that Cr_7C_3/ Ni_3Al composite may become an attractive potential candidate for high-temperature surface wear-resistant material.
Cr7C3/Ni3Al复合材料的室温、高温硬度远高于传统高温耐磨材料Stellite合金，该材料有望成为一种新型的高温耐磨表面强化材料。 - Study on high-temperature resistance carbon-graphite seal material
耐高温碳&石墨密封材料的研究 - The structure of the mobile substation and its application to the power supply system in Europe and America are presented. The requirements of related standards and the application of high-temperature insulating material and hybrid insulation system are introduced.
概述了移动式变电站的结构及其在欧美供电系统中的应用，介绍了耐高温绝缘材料和混合绝缘系统的应用及相关标准规定。 - It is introduced the development. characteristics and advantages of high-temperature superconducting material-It is analyzed effect this material on the development of superconducting generator, superconducting electromagnetic storage generating system and superconducting flywheel storage generating system.
介绍了高温超导体新材料的开发、性能和优点，分析了高温超导新材料对超导发电机、超导电磁蓄能发电系统和超导飞轮蓄能发电系统发展的影响。 - The application of yttrium in superconductor, constructive porcelain refractory material, luminescence material, laser material, optimum performance alloy, high-temperature coating material, refrigeration technique, spaceflight and aviation industry, iron and steel industry and medical science and its development in these fields are introduced.
本文叙述了稀土元素钇在超导体、结构陶瓷、耐火材料、发光材料、激光材料、高性能合金、高温涂层、致冷技术、航天航空工业、钢铁工业及医学等方面的应用开发情况。 - Measurement of Linear Expansion Coefficient for High-temperature material by moir é interferometry
高温密栅云纹法测定高温材料热膨胀系数的研究 - Application of New High-temperature and Superconducting Material in Electric Power Equipment
高温超导新材料在电力设备上的应用 - Nickel-base High-temperature Self-Lubricating Material
镍基高温自润滑材料 - Through analysis, some measures of improving material properties at high temperature have been pointed out. They are: ( 1) optimizing chemical contents can improve the structure stability of high-temperature component material;
通过分析比较后指出改善高温材料性能的措施为：1、通过改进化学成分能提高高温部件材料的组织稳定性； - By analyzing material performance and comparing stress calculation, the problems of selecting proper materials of cylinder horizontal bolts for subcritical steam turbine are solved, and the method of choosing high-temperature bolts material is provided in this paper.
通过材料性能分析和应力计算比较，解决了亚临界汽轮机汽缸中分面螺栓选材问题，并由此提出了汽轮机高温螺栓材料选择的方法。 - Study on the Tribological Properties of WC-Ni-Co-Mo-PbO High-Temperature Self-Lubricating Cermet Material
碳化钨－镍－钴－钼－氧化铅系高温自润滑金属陶瓷材料的综合性能研究 - Pressure measurements because of the high-temperature material temperature limits, pressure testing has been the need to overcome the problem areas.
高温压力的测量因受材料温度限制，一直是压力检测领域需要攻克的难题。 - At present, the high-temperature superconducting material, which received practical application in the strong electric fields, are the Y system and Bi system.
目前，在强电领域获得实际应用的高温超导材料是Y系和Bi系。 - TiAl-based alloys become a very potential high-temperature structural material because of its high specific strength, high specific stiffness and good high temperature performance.
TiAl基合金由于其高比强度、高比刚度和优异的高温性能而成为一类非常有潜力的高温结构材料。 - NiAl alloy is an high-temperature structural material, and it has many excellent performances, also it is a development potential alloy material.
NiAl合金是高温结构材料，具有很多优良的性能，是很有发展潜力的合金材料。 - C/ C composite, which is a material of carbon fiber reinforced carbon matrix composite and has anti-high temperature, low density, high specific strength, high specific stiffness and excellent thermal shock resistance and other characteristics, is an excellent high-temperature ablation resistant material.
C／C复合材料即炭纤维增强炭基体复合材料，具有耐高温、低密度、高比强度、高比刚性和抗热震性等优良的特点，是一种优良的高温抗烧蚀材料。 - Multi-pass deformation also shows that in high-temperature rolling process, the material will be softened as a result of the recovery and recrystallization, so the rolling force is reduced and the time interval of the passes of rough rolling should be longer.
多道次变形还表明，在高温轧制过程中，道次间隔的时间内，材料会发生回复和再结晶而软化，降低了轧制力，因此粗轧各道次间隔时间长一些。